Hey guys, sorry for long time never update my blog. Was busy for the past few months with my academic and university activities. This will just be a very short post where I will share some useful document about general PCB terminology. For those who are into PCB designing, I think this document would help you in understanding the common terms used as a PCB designer. Download link Other websites :
Hey all, welcome to my blog ! Sorry for did not update my blog for like 2 weeks already. Was pretty busy on training and organized my things.
Are your tools like stripper, cutter, test pen and some others tools been placed everywhere and sometimes it is hard for you to find them when you want to use them ! Well, this problem always happen to me where my workbench is pretty messy. So, I thought of making myself a simple board to place all my tools and equiments.
Hey guys, today we are going to look through something that is very common in our life - Temperature. I understand that the surrounding temperature in Malaysia is quite high, probably around 32 - 34 degree celsius due to the hot weather in Malaysia.Have you ever wonder how can you meausre the surrounding temperature ? By guessing it ? Hahaha. Well, let me introduce you to a temperature sensor - LM 35 ( Celsius)
Hey all, was pretty busy since I posted my last post. I was busy learning and designing new things for the past few weeks. Nevertheless, I will still find some time to get my blog updated with some useful information.
In this post, I am not going to talk more. I would like to recomend to you guys a very good electronic circuit websites.
A DS1307 is a pretty simple , inexpensive and easy to use real time clock IC. This IC can count date and time accurately. Once the time and date is set, it will continue its counting if the power(backup battery) is there ! The backup battery ( coin cell battery) is there to keep the DS1307 counting operation if the main power supply is cut off.
Recently, many have been asking me what software I am using for the schematic drawing for my DIY PCB. So, I decided to make this post and share with everyone about the PCB drawing software that I have been using all this while.
Relay is an electrical operated switch that people
normally used when they want to control a higher voltage circuit from a
lower voltage circuit. Current flowing through the coil of therelay creates a magnetic field which attracts a lever and changes the switch contacts.